Pelapisan Calsium Carbida Permukaan Baja Karbon Rendah Dengan Pack Carburizing Energizer Serbuk Cangkang Kerang Mutiara

Authors

Sujita Darmo , Sugiman Sugiman , Salman Salman , Agus Dwi Catur , Paryanto Dwi Setyawan

DOI:

10.29303/jpft.v6i2.2073

Published:

2020-12-14

Issue:

Vol. 6 No. 2 (2020): Juli-Desember

Keywords:

low carbon steel, pack carburizer, media carburize, pinctada maxima shell powder

Articles

Downloads

How to Cite

Darmo, S., Sugiman, S., Salman, S., Catur, A. D., & Setyawan, P. D. (2020). Pelapisan Calsium Carbida Permukaan Baja Karbon Rendah Dengan Pack Carburizing Energizer Serbuk Cangkang Kerang Mutiara. Jurnal Pendidikan Fisika Dan Teknologi, 6(2), 213–219. https://doi.org/10.29303/jpft.v6i2.2073

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Abstract

The research was conducted at the Laboratory of Material Mechanics, Department of Mechanical Engineering, Mataram University. The purpose of this researchàà determinedà the effect of the Pack Carburizingà parameters (temperature, soakinà time and carburizer media composition) on the thicknessà of calsium carbida layerà (CaC), which is formed on the surface of low carbon steel. The thickness of the calcium carbonate layer affects the surface hardness numberà of low carbon steel. This research used low carbon steelà grade SS400 as the specimen. Carburizer media is a mixture of corncob charcoal powder and Pinctada maxima shellsà powder (PMSP).à Packs Carburizing was carried out at various temperatures: 875 0C, 900 0C, soakingà time: 1,2,3 hours and the percentage of PMSP on the carburizer media: 10%, 20%, 30%. The results of the research show that the temperature carburizing , soaking time and the addition of PMSPà affect the thickness of the calcium carbide layer on the surface of SS400 steel which is subjected to pack carburizing process. This is indicated by an increase in the surfaceà hardness number of 421%, the wear resistance 62,2 %. àthe thickness of the calcium carbide layer 1050 õm, the formation of pearlite structure, at the carburizing temperature of 900 0C,à soaking time 3 hours and 30% addition of PMSP.

References

William D. Callister. (2014). Materials Science and Engineering 9th Edition John Wiley.

Ihom, P. A. (2013). Case hardening of mild steel using cowbone as Energiser. African Journal of Engineering Research, 1(October), 97ââ¬â101.

Jatmiko, B. A. (2013). Karburisasi Baja SS316 Menggunakan Arang Sekam Padi Dan Arang Kayu Sengon. Skripsi. Tidak dipublikasikan. Bogor: Departemen Fisika Fakultas Matematika dan Ilmu Pengetahuan Alam Institut Pertanian Bogor

Khadijah, S., Abdullah, B., Jaffar, A., Abdul, S., Faizul, M., Azimin, M., & Ghani, A. (2013). Mechanical properties of paste carburized ASTM A516 Steel. Procedia Engineering, 68, 525ââ¬â530. https://doi.org/10.1016/j.proeng.2013.12.216

Kuswanto, B. (2010). Pengaruh Perbedaan Ukuran Butir Arang Tempurung Kelapa-Barium Karbonat Terhadap Peningkatan Kekerasan Permukaan Material Baja ST 37 Dengan Proses Pack Carburizing. Tesis. Tidak dipublikasikan. Semarang: Magister Teknik Mesin Program Pascasarjana Universitas Diponegoro.

Miernik, K., Bogucki, R., & Pytel, S. (2010). Effect of Quenching Techniques on The Mechanical Properties of Low Carbon Structural Steel. Archives of Foundry Engineering, 10(3), 91ââ¬â96.

Ngakan, D., & Putra, K. (2016). Efektifitas Carburizer dari Sumber Karbon Berbeda Pada Proses Pack Carburizing. METTEK, 2(1), 5ââ¬â10.

Oyetunji, A., & Adeosun, S. O. (2012). Effects of Carburizing Process Variables on Mechanical and Chemical Properties of Carburized Mild Steel. Pakistan Journal of Basic and Applied Sciences, 8(2), 1ââ¬â7.

Priyadarshini, S., Sharma, T., & Arora, G. (2014). Effect of Post Carburizing Treatment on Hardness of Low Carbon Steel. International Journal of Advanced Mechanical Engineering, 4(7), 763ââ¬â766. Retrieved from http://www.ripublication.com

Rai, P. K. (2016). Study on Mechanical Properties of Carburized Mild Steel Subjected to Heat Treatment. International Journal of Engineering Technology and Computer Research (IJETCR), 4(1), 83ââ¬â87.

Rijab, M. A., & Al-mosawi, A. I. (2014). Effect of carburizing on fatigue strength. In 3rd International Scientific Conference F.T.E.

Roy, S., & Sundararajan, S. (2016). Surface & Coatings Technology The effect of heat treatment routes on the retained austenite and Tribomechanical properties of carburized AISI 8620 steel. Surface & Coatings Technology, 308, 236ââ¬â243. https://doi.org/10.1016/j.surfcoat.2016.06.095

Sujita Darmo, Rudy Soenoko, Eko Siswanto And Teguh Dwi Widodo, (2018). Study On Mechanical Properties Of Pack Carburizing SS400 Steel With Energizer Pomacea Canalikulata Lamarck Shell Powder. International Journal of Mechanical Engineering and Technology (IJMET) - Scope Database Indexed.Volume:9,Issue:5,Pages:14-23. Available online at http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=9&IType=5.

Sujita Darmo, Rudy Soenoko, Eko Siswanto And Teguh Dwi Widodo, (2018). Study Pack Carburizing For Subsoil Plow Chisel With Alternative Carburizer Media Corn Cob Charcoalââ¬âPictada Maxima Shell Powder. International Journal of Mechanical Engineering and Technology (IJMET) - Scope Data base Indexed.Volume:9,Issue:6,Pages:443-449. Available online at http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=9&IType=6

Author Biographies

Sujita Darmo, Mataram University

Mechanical Engineering Department

Sugiman Sugiman, Universitas Mataram

Jurusan Teknik Mesin

Salman Salman, Universitas Mataram

Jurusan Teknik Mesin

Agus Dwi Catur, Universitas Mataram

Jurusan Teknik Mesin

Paryanto Dwi Setyawan, Universitas Mataram

Jurusan Teknik Mesin

License

Authors who publish with Jurnal Pendidikan Fisika dan Teknologi (JPFT) agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License 4.0 International License (CC-BY-SA License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in Jurnal Pendidikan Fisika dan Teknologi (JPFT).
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).